Power post shut off

Discussion in 'General Community Discussions' started by weighit, Sep 8, 2024.

  1. weighit

    weighit
    Expand Collapse
    Member

    Joined:
    Aug 31, 2006
    Messages:
    224
    Likes Received:
    190
    Just returned from another trip staying at a total of 9 rv parks. In all except one as I was about to plug my power cord into the post, the 50 amp breaker was on. I always shut it off before disconnecting, and inspect before plugging to ensure it is off. I guess many don't do this and wonder if it is a problem or not? ideas....
     
    mdcamping and Paythebill like this.
  2. Paythebill

    Paythebill
    Expand Collapse
    Member
    Staff Member

    Joined:
    Nov 23, 2017
    Messages:
    1,461
    Likes Received:
    466
    Not sure if it makes any difference or not, but I always ensure all the breakers are in the off position. Then I connect the ems, turn on the breaker, if ems shows power is good, then I shut breaker of again, then connect power cord to camper and turn breaker on. Then pop a cold one. ;)
     
    mdcamping and BankShot like this.
  3. NYDutch

    NYDutch
    Expand Collapse
    Member

    Joined:
    Jul 31, 2009
    Messages:
    1,175
    Likes Received:
    746
    With the breaker off, there's no risk of the contacts arcing when you plug into the socket. With 50 amp service, there's also a potential for the two hot lines to make contact before the neutral makes contact which could cause an over or under voltage condition at any live 120 volt appliances such as a tv, microwave, converter, residential refrigerator, or air conditioner.
     
  4. BankShot

    BankShot
    Expand Collapse
    Member

    Joined:
    May 26, 2013
    Messages:
    1,698
    Likes Received:
    1,837
    My procedure pretty much follows what paythebill does. Main thing is make sure that the power at the pole is fully off before proceeding to hook up. The day we bought our motorhome I purchased a top of the line surge protector that we use every time we hook up. It has saved us several times over the years..Safe and happy travels........

    BankShot...(akaTerry)
     
  5. Fitzjohnfan

    Fitzjohnfan
    Expand Collapse
    Member

    Joined:
    Apr 6, 2010
    Messages:
    789
    Likes Received:
    614
    it's hit or miss if the breaker is turned off when you get there. like others said, it should be off when plugging in to avoid arcing.
    Thanks for doing your part to turn it off when you leave. I put people who dont turn off the breaker right there with people who didnt rewind VHS tapes back we rented those things.
     
    mdcamping and Paythebill like this.
  6. mdcamping

    mdcamping
    Expand Collapse
    Member
    Staff Member

    Joined:
    Jul 3, 2007
    Messages:
    1,376
    Likes Received:
    841
    yup I like to have the breaker shut off first before plugging in and shutting off the breaker first before disconnecting.

    Mike
     
    BankShot and Paythebill like this.
  7. Paythebill

    Paythebill
    Expand Collapse
    Member
    Staff Member

    Joined:
    Nov 23, 2017
    Messages:
    1,461
    Likes Received:
    466
    rewind VHS? I even rewind DVD.:rolleyes:
     
    mdcamping and Fitzjohnfan like this.
  8. BankShot

    BankShot
    Expand Collapse
    Member

    Joined:
    May 26, 2013
    Messages:
    1,698
    Likes Received:
    1,837
    Good point Mike, I think most of us do that but there may be a few that don't don't remember that first step when unhooking...:rolleyes:

    Terry..(aka BankShot)
     
    mdcamping likes this.
  9. weighit

    weighit
    Expand Collapse
    Member

    Joined:
    Aug 31, 2006
    Messages:
    224
    Likes Received:
    190
    Looks like I have not been in any of the sites you guys have been in, Big Grin. I just found it odd that so many were still switched on. I don't look at the 30 amp plug but it probably was going to fall into the same numbers I found on the 50 amp.
     
    mdcamping likes this.
  10. NYDutch

    NYDutch
    Expand Collapse
    Member

    Joined:
    Jul 31, 2009
    Messages:
    1,175
    Likes Received:
    746
    At a number of the state parks we favor, I've always been happy to see the staff check the breakers when cleaning the vacant sites. A few years ago when we pulled in to register at one NY state park a bit early, the check in clerk told us our site hadn't been cleaned yet due to a staff shortage. She said we could go to our site, but please let them know if any work needed to be done. She also said to be sure the breakers were off before we plugged in. As I recall,they were off and the site was clean, so I'm thinking the previous guest was one of the good RV'ers.
     
    mdcamping likes this.
  11. mdcamping

    mdcamping
    Expand Collapse
    Member
    Staff Member

    Joined:
    Jul 3, 2007
    Messages:
    1,376
    Likes Received:
    841
    Assateague State park in MD has 1 heavily used 30 amp only electric loop. On one of the past times setting up our site I noticed my 30 amp plug on the pole was partly melted. The good news office was great about it getting the plug replaced as I'm guessing it was under 2 hrs.

    I did find it annoying that someone would leave the plug like that without reporting it...

    Mike
     
    weighit and NYDutch like this.

Share This Page